Portable Vector Analyzer , Multifunctional Phase Parameter Comprehensive Tester,Secondary Circuit Test Tools

I. Product Description and Advantages:

• Large screen dot matrix LCD display, can measure simultaneously, with the screen display of 16 parameters, such as U1,I1,φ1,U2,I2,φ2,U3,I3,φ3,φU1U2,φU2U3,φU3U1,φI1I2,φI2I3,φI3I1 and U1F.
• Voltage measurement resolution of 10 mV, current measurements up to the highest resolution 0.1 mA.
• In the measurement range of 45.00 ~ 65.00 Hz voltage frequency, resolution of 0.01 Hz.
• In the range of 0.0 ~ 360.0 °, measure the phase between U-U, U-I, I-I, the resolution of 0.1 °. While testing phase, require input voltage range of 10 ~ 500V, input current range of 10 mA ~ 120A. Void phase measurements with the symbol "..." indication to avoid that the operator will normally take the phase value "0.0 °" as a valid measurement when no signal is input.
• Direct dynamic or static vector graphics display system.
• After choosing ML250 clamp type current transformer, detect the polarity of the transformer, and direct display the ratio R (R = I1/I2) between I1 and I2 and the phase φI1I2 reflecting polarity between I1 and I2.
• Built-in memory save 50 group (panel) measurements data. By operating buttons on the panel access to the saved historical data sets and vectors.
• With RS-232 interface, instrument measurement data can be uploaded to a PC and formed a database for storage by PC management software, or print the report for file.
• Install rechargeable battery in it, the continuous working time is up to 15 hours or more when the LCD backlight is off, and for 11 hours or more when the LCD backlight is on.
• Using software calibration techniques, simple operation, reliable data, long-term stability.

II. Main technical parameters and Model comparision:

1,Voltage channels,floating input

2,Current channels,clamp type current transformer

3,Voltage withstand: AC voltage withstands under 2K / 50 Hz sine wave for 1 min.

4,Insulation resistance: Insulation resistance between test points is greater than 10 MΩ.

5,charge power :160V～250V, 50 Hz.

6,Charging period when power off: The maximum charging period is three hours when it is power off.

7,Discharging time when power on: the continuous working time is for 15 hours or more when the LCD backlight is off, and for 11 hours or more when the LCD backlight is on.

8,Charge-discharge cycle counts: 500 times

9,Natural discharge: At 20℃, after one month, the full battery will be 70% of the initial capacity.

10,Dimension: 248*188*72 weight : 1.5 Kg

III. Test accessories

1,Testing wire for voltage: 1 set(6pcs)

2,ML10 Clamp type CT 3pcs

3,Two-core charging power line:1 set

4,RS232 communication line: 1 piece

5,Software CD: 1 copy

6,Braces for the instrument: 1 piece

7,Portable suitcase: 1 piece

8,Instruction manual : 1 copy

9,Certificate of quality: 1 copy

10,Packing list: 1 copy

11,Fuse :φ5×20 / 1A 3 pieces

12,Power input jack: 3 pieces

Founded in 2003, FANKE is the domestic leader specializing in designing and manufacturing HV test, measurement and overhaul equipments. In 2003, Wuhan HIGHVOLT Co.,Ltd is established as our subsidiary. We provide a diversity of complete testing solutions and one-stop service for electric power companies, electric research institutions and electric equipments manufacture companies.
Located in Guannan Science and Technology Industrial park-- the Optical Valley of China, we cover an area of 12,000 square meters used for workshop and offices.With the registered capital of 16,000,000 yuan, our annual sales volume reaches 70,000,000 yuan. As a sub-measurement unit of Wuhan city, we develop us as a comprehensive high-tech enterprise integrating research, development, production, installation, commission, sales and service consultancy.

Good networking keeps us stay advantageous and innovative in the market. Relied on the wide cooperation with institutions of higher learning in Wuhan, we establish a HV research center supported by professional HV engineers and specialists from Wuhan High Voltage Research Institute of State Grid, Institute of Water Conservancy and Hydroelectric Power of Huazhong University of Science &Technology and Wuhan University.

Our management team is composed of professional administrators with rich experience in modern business and project management and technical personnel specializing in HV, power transmission, transformation and automation. Until now, we employ 75 stable workers, 65% of whom have bachelor degree and some of the rest are advanced engineers and professional experts with Doctor degree.

We hold numerous intellectual property rights, utility model and invention patents for products, such as hydraulic integrated high voltage withstand test system, series resonant test trail, ultra high voltage AC/DC voltage withstand test equipment, power frequency PD free voltage withstand test equipment and other electric power maintenance equipments as well as other tailor-made products.
Our products have been applied for onsite handover, preventive maintenance and quality inspection test. We have customers all around the country, including stated-owned institutions and large-scaled enterprises in sections of railway, oil industry and chemical engineering. Some products have been exported to overseas markets, including USA, Mid-east, Korea, India and Vietnam, ect.

With a vision to win-win result, We will continue to focus on customer needs and rely on technical innovation, striving to become the top-ranking provider for electric testing and measurement equipments and EPC engineering service.