Large Capacity DC High Voltage Generator , DC Hipot Tester For Water-Cooled Type Generator , Leakage Current Tesing

I. Application :

FKSZG series large-capacity DC high-voltage generator (DC hipot tester) , also named as"water-cooled generator leakage current tester", is designed for water-cooled generator leakage current and DC voltage test usage.Due to large water-cooled generator winding conduction current is very large, in the test voltage to 20-150mA or so. If there is not enough output capacity of the DC high voltage generator, can not boost.The current domestic DC high voltage tester output current is generally within 10mA, the output current of 200mA high voltage generator is blank.

The design and manufacturing guiding ideology is caused from the following:

1, Due to large water-cooled generator winding conduction current is very large, in the test voltage to 20-150mA or so. If there is not enough output capacity of the DC high voltage generator, can not boost.

2, The current domestic DC high voltage tester output current is generally within 10mA, the output current of 200mA high voltage generator is blank.

3, The DC test for the general high-voltage electrical equipment, can be found in the insulation of the penetration defects, and for the motor, it can uniquely find its local insulation defects (stator coil end insulation)

4, In order to be able to accurately measure the leakage current of the water-cooled generator, the FKSZG series of high-voltage generator specially designed a variety of interference current compensation circuit test can completely rule out the stray current and the water pipe polarization potential interference Influence, really measured the current of the test sample.

5.FKSZG series DC high voltage generator with intermediate frequency voltage doubler circuit. The first application of the latest PWM pulse width modulation technology and high-power IGBT devices. And according to the electromagnetic compatibility theory, the use of special shielding, isolation and grounding and other measures. So that the DC high voltage generator to achieve a high quality, portable and can withstand the rated voltage discharge without damage.

6.Based on the output voltage of tested generator is no more than 20KV(Un), the on-site DC hipot test voltage is 3Un=60KV, water cooled type power generator leakage current is generally less than 200mA. So model FKSZG--80KV/200mA test set is for staying some margin..

II. Technical Features

FKSZG-series tester is designed for water-cooled generator leakage current and DC voltage withstand test , it is based on the "low-voltage shielding method" developed the principle of the use of intermediate frequency voltage Circuit, using the latest PWM pulse width modulation technology and high power IGBT devices. And according to the electromagnetic compatibility theory, the use of special shielding, isolation and grounding and other measures. Its main features are:

1) The whole set of devices only by the power box and the double-voltage cylinder, wiring is very simple.

2) Use electronic circuit to control and regulating voltage, easy to operate, comfortable; voltage, current, etc. are directly read on the LCD and no conversion.

3) Has timing and auto-clue functions, designed according to the requirements of the test procedures and relative test standard of generator

4) Perfect over-voltage and over-current protection.

IV. Technical parameters

V. Optional model

Model: FKSZG- 60KV/200mA : test for the output voltage of tested generator ≤ 15KV(Un)

Model: FKSZG- 80KV/200mA : test for the output voltage of tested generator ≤ 22KV(Un)

Model: FKSZG- 90KV/300mA : test for the output voltage of tested generator ≤ 25KV(Un)

Model: FKSZG- 120KV/300mA : test for the output voltage of tested generator ≤ 35KV(Un)

VI. Test Connection Figure

VII. Supply List

Founded in 2003, FANKE is the domestic leader specializing in designing and manufacturing HV test, measurement and overhaul equipments. In 2003, Wuhan HIGHVOLT Co.,Ltd is established as our subsidiary. We provide a diversity of complete testing solutions and one-stop service for electric power companies, electric research institutions and electric equipments manufacture companies.
Located in Guannan Science and Technology Industrial park-- the Optical Valley of China, we cover an area of 12,000 square meters used for workshop and offices.With the registered capital of 16,000,000 yuan, our annual sales volume reaches 70,000,000 yuan. As a sub-measurement unit of Wuhan city, we develop us as a comprehensive high-tech enterprise integrating research, development, production, installation, commission, sales and service consultancy.

Good networking keeps us stay advantageous and innovative in the market. Relied on the wide cooperation with institutions of higher learning in Wuhan, we establish a HV research center supported by professional HV engineers and specialists from Wuhan High Voltage Research Institute of State Grid, Institute of Water Conservancy and Hydroelectric Power of Huazhong University of Science &Technology and Wuhan University.

Our management team is composed of professional administrators with rich experience in modern business and project management and technical personnel specializing in HV, power transmission, transformation and automation. Until now, we employ 75 stable workers, 65% of whom have bachelor degree and some of the rest are advanced engineers and professional experts with Doctor degree.

We hold numerous intellectual property rights, utility model and invention patents for products, such as hydraulic integrated high voltage withstand test system, series resonant test trail, ultra high voltage AC/DC voltage withstand test equipment, power frequency PD free voltage withstand test equipment and other electric power maintenance equipments as well as other tailor-made products.
Our products have been applied for onsite handover, preventive maintenance and quality inspection test. We have customers all around the country, including stated-owned institutions and large-scaled enterprises in sections of railway, oil industry and chemical engineering. Some products have been exported to overseas markets, including USA, Mid-east, Korea, India and Vietnam, ect.

With a vision to win-win result, We will continue to focus on customer needs and rely on technical innovation, striving to become the top-ranking provider for electric testing and measurement equipments and EPC engineering service.