Gas Insulation AC Hipot Analyzer , AC Withstand Voltage Test Set , SF6 Gas Insulation

I. Product Description

Model CQSB-8KVA/80KV, is designed for AC Dielectric test. For AC test, it works at power frequency50/60Hz. The HV booster adopts SF6 insulation to reduce weight itself than oil immersed insulation or epoxy resin insulation.

Automatic boosting, automatic timing, automatic step down, and displays pass or fail; If test fail, then break down/ARC voltage,over current could be recorded for analysis;it also can be control by computer,convenient for the consumer to use.

II. Applications:

AC test for switchgears, transformers, motors.etc;The test set is more intelligent instrument, widely used for electrical test at various factories and institutes.

III. Functions

1. SF6 gas insulation on HV booster
2. Microprocessor controlled
3. Digital Display
4. High Accuracy
5. High Resolution;
6. Auto Timing
7. Fully Protections
8. Alarm
9. Auto Timing

IV. Product Features:

1. Auto operation mode;
2. Guided Menu, easily operated even for those person no reading the user manual before
3. Boosting speed controlled at auto mode. While test voltage up to target 80%, its boosting speed will be down slowly automatically;
4. Some stages can be set up during the boost process. The equipment can be suspended at any time during the boost process. The feature is useful for operator to observe or diagnose;
5. While the test is finished, different alarm sounds indicate pass or fail test result. meanwhile, pass or fail also displayed on the screen;
6. If test fail, then break down/ARC voltage, over current could be recorded for analysis;
7. AC high current is measured directly by Rogowski powered coil;
8. Password design to prevent unauthorized operation;
9. Build-in micro-printer;
10. Strong anti- interference capacity
11. RS232 interface communication with computer,test and save report to computer;
12. Fully Protections against over current, Over voltage,Flash-over;

​V. Technical Specifications:

1. Output:0-80KVac, 100mA,sine wave,
2. Capacity:8KVA
3. Timing range: 0-999S
4. Voltage measure accuracy:≤1.5% (F.S)+3 bites
5. Currency measure accuracy:≤1.5% (F.S)+3 bites
6. Duration: 5 minutes at rated capacity
7. Input voltage:AC220V±10% 50/60Hz±1
8. Ambient temperature:－8℃～50℃
9. RH:85%, No dew
10. Sea level above: 1000 meter or below
11. Size and Weight
12. For test transformer:300X210X530mm,28KG
13. For control panel: 540X430X380mm,22Kg

Founded in 2003, FANKE is the domestic leader specializing in designing and manufacturing HV test, measurement and overhaul equipments. In 2003, Wuhan HIGHVOLT Co.,Ltd is established as our subsidiary. We provide a diversity of complete testing solutions and one-stop service for electric power companies, electric research institutions and electric equipments manufacture companies.
Located in Guannan Science and Technology Industrial park-- the Optical Valley of China, we cover an area of 12,000 square meters used for workshop and offices.With the registered capital of 16,000,000 yuan, our annual sales volume reaches 70,000,000 yuan. As a sub-measurement unit of Wuhan city, we develop us as a comprehensive high-tech enterprise integrating research, development, production, installation, commission, sales and service consultancy.

Good networking keeps us stay advantageous and innovative in the market. Relied on the wide cooperation with institutions of higher learning in Wuhan, we establish a HV research center supported by professional HV engineers and specialists from Wuhan High Voltage Research Institute of State Grid, Institute of Water Conservancy and Hydroelectric Power of Huazhong University of Science &Technology and Wuhan University.

Our management team is composed of professional administrators with rich experience in modern business and project management and technical personnel specializing in HV, power transmission, transformation and automation. Until now, we employ 75 stable workers, 65% of whom have bachelor degree and some of the rest are advanced engineers and professional experts with Doctor degree.

We hold numerous intellectual property rights, utility model and invention patents for products, such as hydraulic integrated high voltage withstand test system, series resonant test trail, ultra high voltage AC/DC voltage withstand test equipment, power frequency PD free voltage withstand test equipment and other electric power maintenance equipments as well as other tailor-made products.
Our products have been applied for onsite handover, preventive maintenance and quality inspection test. We have customers all around the country, including stated-owned institutions and large-scaled enterprises in sections of railway, oil industry and chemical engineering. Some products have been exported to overseas markets, including USA, Mid-east, Korea, India and Vietnam, ect.

With a vision to win-win result, We will continue to focus on customer needs and rely on technical innovation, striving to become the top-ranking provider for electric testing and measurement equipments and EPC engineering service.